LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 1994 >> S4 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Output Diagnostic Test Mode (DTM) >> Reading/Measuring Value Block (Function 08) >> Display Group 00
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display Group 00

NOTE: For help in identifying Display Group Number Breakdown and Display Group Number Overview information charts (tables), refer to illustrations. See Figure -Figure
  1. Select desired display group number corresponding to the display group overview.
  2. Press -Q- button to confirm input. "DISPLAY GROUP 00". Press -0- button twice to select display group 00.
  3. Display will read - "READ MEASURING VALUE BLOCK" "INSERT DISPLAY GROUP NUMBER 00".
  4. Press -Q- button to confirm input. Display will read - "READ MEASURING VALUE BLOCK" "1 2 3 4 5 6 7 8 9 10".
    NOTE: With printer connected, each time the PRINT button is pressed the most recent display will be printed. Press -C- button before selecting additional display groups. After selecting another display group, printer must be switched on again each time.
scientia non olet · About LEMON Manuals