Removal & Installation: ECM: Installation
CAUTION:
DO NOT connect Motronic ECM with ignition switch in ON position.
- Ensure that ignition is switched OFF. Connect Motronic ECM harness connector to Motronic ECM. Install Motronic ECM tightly in electronics box. Connect vacuum line to Motronic ECM.
- Carefully push lower cover into both openings of electronics box and lock in. See Fig 1 . Carefully put upper cover into both openings of electronics box. Screw both covers of electronics box to each other. See Fig 2 .
- Cover electronics box with carpeting. Reinstall "A" pillar cover. See Figure .