Removal & Installation: ECM: Removal

With ignition switch in OFF position. Remove cover fasteners (arrows) from lower right "A" pillar. See Fig 1 . Pull back carpeting in right front foot well.
Remove screws (arrows) from electronics box cover. See Fig 2 . Carefully pull upper and lower cover out of electronics box.
Disconnect Motronic ECM from electronics box. Remove hose clamp from vacuum line and pull vacuum line out.

Fig 1: Removing The Motronic Engine Control Module (1 Of 2)

Courtesy of AUDI OF AMERICA, INC.

Fig 2: Removing The Motronic Engine Control Module (2 Of 2)

Courtesy of AUDI OF AMERICA, INC.