| Base,In-Line4 | | 8.2 | 6.8 | C |
| Combination Procedure: CONVERTER: Drain & Test: |
| | 0.2 | | C |
| Combination Procedure: CONVERTER SEAL: Remove & Replace: |
| Automatic Trans | | 0.3 | | B |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| In-Line4, Rear | Includes: R&I Oil Pan. | 2.6 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: OIL PUMP: Overhaul Removed: |
| Front Pump | | 0.5 | | B |
| Combination Procedure: OIL PUMP: Remove & Replace: |
| | 4.3 | | B |
| Combination Procedure: PINION SHAFT SEAL: Remove & Replace: |
| Front | | 0.7 | | B |
| Rear | | 0.5 | | B |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.1 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| | 0.6 | | C |