Accelerator Pedal Cable
WARNING:
Accelerator cable is easily kinked, handle with care. If accelerator cable is kinked, replace cable.
NOTE:
Accelerator cable is fixed to accelerator pedal and cam disc. Length of accelerator pedal cable sleeve is not determined by securing clip.
- Depress and hold accelerator pedal to Wide Open Throttle (WOT) position. Pull cable sleeve back toward WOT position until throttle valve is fully open and kickdown switch is actuated (clicks). Go to next step.
- Hold tight in this position. Insert securing clip for cable sleeve. See Fig 1 . Release accelerator pedal. After adjustment, ensure throttle opens to WOT position and closes until closed throttle stop is contacted. See Fig 2 .