Exhaust System, Emission Control, Generic Scan Tool - 2.8L V6 Aha, ATQ

• Exhaust System,Emission Control
  • Exhaust system components, removing and installing
    • Notes
    • Exhaust manifold, front exhaust pipe with Three Way Catalytic Converter (TWC) and attachments
    • Mufflers with mounts
      • All Wheel Drive (AWD) vehicles
      • Separating point between center and rear muffler
        • Recommended special tools and equipment
        • Procedure
      • Front Wheel Drive (FWD) vehicles
      • Separating Point Between Center And Rear Muffler
    • Three Way Catalytic Converter (TWC), checking
      • Function test
  • Secondary Air Injection (AIR) system
    • Notes
    • Function
    • Secondary Air Injection (AIR) system components, removing and installing
      • Secondary Air Injection (AIR) Pump Motor -V101- Assembly overview
      • Connecting pipe and combination valves - Assembly overview
      • Secondary Air Injection (AIR) Pump Relay -J299-* (-1-) with fuse -2- in protective housing (engine compartment, left)
    • Secondary air system, checking for proper seal
      • Function test
      • Checking Proper Seal
    • Secondary Air Injection (AIR) valve, checking
      • Notes
      • Recommended special tools and equipment
      • Test requirements
      • Test sequence
        • Notes
        • Vehicles with engine code AHA
        • Vehicles with engine code ATQ
        • Continuation for all vehicles
    • Secondary Air Injection (AIR) pump motor, checking
      • Recommended special tools and equipment
      • Test requirements
      • Test sequence
    • Combination valves, checking
      • Recommended special tools and equipment
      • Test requirements
      • Test sequence
    • Combination valves, removing and installing
      • Notes
      • Remove left combination valve
        • Notes
        • Installing
      • Remove right combination valve
        • Notes
        • Installing