Specifications & Procedures
- Vehicle Identification
- Identifying Suspension Variations
- Jacking & Hoisting
- Wheel Alignment Procedures
- Preliminary Checks
- Wheel Alignment Work Sequence
- Caster Adjustment (Front Or Rear)
- Camber Adjustment (Rear)
- Toe Adjustment (Rear)
- Camber Adjustment (Front)
- Toe-In Curve Adjustment
- Notes
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BA, 1BC, 1BE, 1BG, 1BH, 1BP, 1BT and 1BJ)
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BB)
- Bringing Vehicle Into Initial Position For Alignment (Suspension Variations 1BY)
- Adjusting Toe-In Curve (All Models)
- Toe Adjustment (Front)
- Special Tools
- Wheel Alignment Specifications