Transmission Assembly: Remove & Replace
WARNING: This page is about the TT Base, 1.8 C, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| FWD | 6.3 | C | ||
| Combination Procedure: CLUTCH PILOT BEARING: Replace: | ||||
| FWD | 0.8 | C | ||
| Combination Procedure: CLUTCH PRESSURE PLATE: Replace: | ||||
| Standard Trans | 0.6 | C | ||
| Combination Procedure: CLUTCH RELEASE BEARING: Replace: | ||||
| FWD | 0.2 | C | ||
| Combination Procedure: FLYWHEEL: Remove & Install or Remove & Replace: | ||||
| Standard Trans | 0.9 | C | ||