Instrument cluster, setting language version

Vehicles with driver information system (DIS)

When a car is supplied to the customer the multi-function monitor display can be set to any of the following languages as required:

Cars are supplied by the factory with the multi-function monitor set to English.

The procedure for changing the language version is as follows:

Connect VAG 1551. Refer to Connecting VAG 1551: .
Switch ignition on.
Enter -1- to select "Rapid data transfer."
Enter -1- and -7- to select the address word "Dash panel insert" and confirm entry with -Q- button.

Press → button twice to advance the program sequence.
Enter -1- and -0- to select the function "Adaptation" and confirm entry with -Q- button.
Enter -0- and -4- to select Adaptation channel 04 and confirm entry with -Q- button.

Channel 4 Adaptation 1 →
- ↑ - ↓ -

Indicated on display

Channel 4 Adaptation 1 Q
Enter Adaptation value XXXXX

Indicated on display

Select the language version by entering the required code according to the following table:

NOTE:

The first four digits must be "0."
If an incorrect code is entered the "Adaptation" function will be terminated automatically and must be re-started.

Example:

Channel 4 Adaptation 1 Q
Enter Adaptation value 00002

Indicated on display

Channel 4 Adaptation 2 →
- ↑ - ↓ -

Indicated on display

Channel 4 Adaptation 2 Q
Store changed value?

Indicated on display

Channel 4 Adaptation 2 →
Changed value is stored

Indicated on display

Rapid data transfer HELP
Select function XX

Indicated on display