Removal & Installation
WARNING: This page is about the A4 Avant Quattro, 1.8 C, Automatic, which is a different variant/trim than selected.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| In-Line4,AWD | 8.8 | C | ||
| Combination Procedure: CONVERTER: Drain & Test: | ||||
| Automatic Trans | 0.2 | C | ||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| Automatic Trans | 0.3 | B | ||
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: | ||||
| In-Line4, Rear | Includes: R&I Oil Pan. | 3.6 | B | |
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| Automatic Trans | 0.3 | C | ||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| AWD | 4.3 | B | ||
| Combination Procedure: PINION SHAFT SEAL: Remove & Replace: | ||||
| Automatic Trans, Front | 0.7 | B | ||
| Automatic Trans, Rear | 0.5 | B | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| Automatic Trans | 0.1 | C | ||
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: | ||||
| Automatic Trans | 0.6 | C | ||