1.8L - Turbo Engine Mechanical, Engine Code(S): ATC, AWP
- 00 General, Technical data
- 10 Engine - Assembly
- 13 Engine - Crankshaft, Cylinder block
- Engine, disassembling and assembling
- Sealing flanges and flywheel, removing and installing
- Crankshaft, removing and installing
- Pistons and connecting rods, disassembling and assembling
- 15 Engine - Cylinder head, Valvetrain
- Cylinder head, removing and installing
- Valve gear, servicing
- 17 Engine - Lubrication
- Lubrication system components, removing and installing
- 19 Engine - Cooling system
- Engine cooling system components, removing and installing
- Engine cooling system components, removing and installing
- Engine cooling system components, overview
- Engine cooling system, draining and filling
- Coolant pump, removing and installing
- Coolant thermostat, checking, removing and installing
- Coolant line, removing and installing
- Radiator, removing and installing
- Cooling system, checking for leaks
- Engine cooling system components, removing and installing
- 21 Turbocharger, G-Charger
- Charge air pressure system with turbocharger
- Charge air pressure system with turbocharger
- Scan Tool (ST) and test equipment safety precautions
- Charge air pressure control system and vacuum system connections, diagram
- Charge air pressure bypass valve, testing
- Recirculating valve for turbocharger -N249-, checking
- Turbocharger and charge air pressure regulating valve, checking
- Charge pressure leak test with V.A.G 1687
- Intake system, checking for leaks using V.A.G 1687 Diagnostic Tool
- Notes
- Special tool V.A.G 1687 Charge air system tester preliminary set-up
- Special tool V.A.G 1687/1 pressure adapter, installing (1.8L Turbo)
- Special tool KLI9210 (Evaporative system leak detector), connecting to 1.8L Turbo
- Special tool KLI9210 (Evaporative system leak detector), preliminary set-up
- Special tool V.A.G 1687, connecting to pressure adapter V.A.G 1687/1 (1.8L Turbo)
- Performing pressure test
- Wastegate bypass regulator valve -N75-, checking
- Charge air pressure sensor -G31-, checking
- Rules for cleanliness
- Turbocharger, assembly overview
- Turbocharger, removing and installing
- Charge air cooling system components, removing and installing
- Charge air cooler (intercooler), removing and installing
- Intake system, checking for leaks using V.A.G 1687 Diagnostic Tool
- Charge air pressure system with turbocharger
- 26 Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, vehicles with front wheel drive
- Exhaust system, vehicles with all wheel drive
- Front exhaust pipe, removing and installing
- Exhaust manifold, removing and installing
- Exhaust system, aligning stress-free
- Exhaust system, checking for leaks
- Secondary air system, components and function
- Secondary air injection system components, removing and installing
- Exhaust system components, removing and installing