Clock, setting correct time

Fig 1: Trip Recorder Reset Button, Central Display And Clock Adjuster Knob

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The clock is in the rev counter dial. Set the time with adjuster knob -1-.

Digital clock

Setting the hour:

Pull the knob.

The hour display will flash.

Turn the knob clockwise or counter-clockwise to change the hour display as required.

Setting the minute:

Pull the knob repeatedly until the minute display flashes.
Turn the knob clockwise or counter-clockwise to change the minute display as required.

Setting the date:

Pull the knob repeatedly until the day, month or year flashes.
Turn the knob clockwise or counter-clockwise to change the day, month or year as required.

Switching date display on or off:

Pull out the knob repeatedly until the date display flashes.
Turn the knob counter-clockwise to switch off the date display and turn clockwise to switch on the date display.

Setting (on or off) will be stored after about 15 seconds.

Radio-controlled clock

Note

The radio-controlled clock can work in two different modes: either as a normal quartz clock or with a radio remote-control signal.

The clock automatically switches to the radio remote-control mode when it receives a strong enough radio signal. The radio control symbol (a radio tower with radio waves) will then appear in the display. If the clock cannot receive an adequate radio signal it will automatically switch to the normal clock mode after three days, and the radio control signal will disappear.