4.2L V8 5V Generic Scan Tool, Engine Code(S): BNK
- 20 Fuel supply
- Fuel Supply System
- Safety precautions
- Rules for cleanliness
- Fuel tank with attachments, component overview
- Fuel delivery unit and Sender for fuel gauge, assembly overview
- Fuel tank, emptying
- Fuel delivery unit, removing and installing
- Fuel pump electrical, checking
- Fuel Pump (FP), checking delivery quantity
- Fuel system, bleeding
- Evaporative emissions (EVAP) system
- EVAP canister/leak detection system, assembly overview
- Hose plan, EVAP canister system/leak detection system
- EVAP system, leak detection
- Evaporative Emission (EVAP) canister system, checking for proper seal
- Evaporative Emission (EVAP) Canister Purge Regulator Valve N80, checking
- Leak Detection Pump (LDP) -V144-, checking
- Electronic Engine Power Control (EPC)
- Fuel Supply System
- 24 Multiport Fuel Injection (MFI)
- Motronic fuel injection system, servicing
- Safety precautions
- Rules of cleanliness
- Technical data
- Component locations, overview
- Notes
- Component located on 3-pin relay carrier in left plenum chamber
- Component located on 4-pin relay carrier in E-box of right plenum chamber
- Connector strip on right side of bulkhead
- Connector strip beneath coolant reservoir
- Engine viewed from front
- Engine viewed from rear
- Secondary air injection (AIR) pump motor V101.
- Air filter, component overview
- Fuel rail with fuel injectors, component overview
- Fuel injectors, removing and installing
- Components, checking
- Oxygen Sensor (O2S) Heater for Heated Oxygen Sensor (HO2S) before catalytic converter, checking
- Oxygen Sensor (O2S) Heater for Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC), checking
- Mass Air Flow (MAF) Sensor G70, checking
- Intake Air Temperature (IAT) Sensor G42, checking
- Throttle Valve Control Module J338, checking
- Engine Speed (RPM) Sensor G28, checking
- Engine Coolant Temperature (ECT) Sensor G62, checking
- Fuel Pump (FP) Relay J17, checking
- Fuel pressure regulator and holding pressure, checking
- Fuel Injectors, checking
- Injection quantity, leak check, and spray pattern of fuel injectors
- Intake system for leaks (false air), checking
- Functions, checking
- Engine Control Module (ECM) J623
- Additional signals, checking
- Motronic fuel injection system, servicing
- 26 Exhaust system, Emission controls
- Exhaust system components, removing and installing
- Exhaust system components, removing and installing
- Exhaust system, assembly overview
- Heated oxygen sensor (HO2S) G39 before catalytic converter, bank 1 (right), removing and installing
- Heated oxygen sensor (HO2S) 2 G108 before catalytic converter, bank 2 (left), removing and installing
- Oxygen sensor (O2S) behind three way catalytic converter (TWC) G130, bank 1 (right), removing and installing
- Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) G131 after catalytic converter, bank 2 (left), removing and installing
- Left exhaust pipe with catalytic converter, removing and installing
- Right exhaust pipe with catalytic converter, removing and installing
- Exhaust system, installing free of tension
- Exhaust system, checking for proper seal
- Secondary air injection (AIR) system
- Secondary air injection (AIR) system
- Principle and function
- Secondary Air Injection (AIR) system, component overview
- Secondary Air Injection (AIR) Pump Motor -V101-, removing and installing
- Left combination valve for Secondary Air Injection (AIR), removing and installing
- Right combination valve for Secondary Air Injection (AIR), removing and installing
- Checking Secondary Air Injection (AIR) system for proper seal
- Combination valve for Secondary Air Injection (AIR), checking function and for proper seal
- Secondary Air Injection (AIR) Solenoid Valve -N112-, checking
- Secondary Air Injection (AIR) Pump Relay -J299-, checking
- Voltage supply for Secondary Air Injection (AIR) Pump Motor -V101-, checking
- Exhaust system components, removing and installing
- 28 Ignition/Glow plug System
- 38 Automatic Transmission - Gears, Hydraulic controls
- Electrical components for regulating transmission, checking
- Electrical components for regulating transmission, checking
- Multi-Function Transmission Range (TR) Switch, checking
- Sensor for transmission RPM, checking
- Sensor for transmission output RPM, checking
- Transmission Fluid Temperature Sensor, checking
- Solenoid valve 1, checking
- Pressure regulator valves, checking
- Transmission Control Module (TCM) J217
- Electrical components for regulating transmission, checking
- ST Generic Scan Tool
- On Board Diagnostic (OBD)
- Diagnostic modes
- Diagnostic Mode 1: Obtain data
- Diagnostic Mode 2: Obtain operating conditions
- Diagnostic Mode 3: Interrogating DTC memory
- Diagnostic mode 4: Reset/delete diagnostic data
- Diagnostic Mode 5: Check lambda test results
- Diagnostic Mode 6: Checking test results of components that are not continuously monitored
- Notes
- Test-ID 01: Oxygen Sensor Monitor Bank 1 - Sensor 1
- Test-ID 02: Oxygen Sensor Monitor Bank 1- Sensor 2
- Test-ID 05: Oxygen Sensor Monitor Bank 2 - Sensor 1
- Test-ID 6: Oxygen Sensor Monitor Bank 2 - Sensor 2
- Test-ID 33: Catalyst Monitor Bank 1
- Test-ID 34: Catalyst Monitor Bank 2
- Test-ID 59: EVAP Monitor (0.040)
- Test-ID 60: EVAP Monitor (0.020)
- Test-ID 61: Purge Flow Monitor
- Test-ID 65: Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
- Test-ID 66: Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
- Test-ID 69: Oxygen Sensor Heater Monitor Bank 2 - Sensor 1
- Test-ID 70: Oxygen Sensor Heater Monitor Bank 2 - Sensor 2
- Test-ID 113: Secondary Air Injection (AIR) system Bank 1
- Test-ID 114: Secondary Air Injection (AIR) system Bank 2
- Test-ID 162: Mis-Fire Cylinder 1 Data
- Test-ID 163: Mis-Fire Cylinder 2 Data
- Test-ID 164: Mis-Fire Cylinder 3 Data
- Test-ID 165: Mis-Fire Cylinder 4 Data
- Test-ID 166: Mis-Fire Cylinder 5 Data
- Test-ID 167: Mis-Fire Cylinder 6 Data
- Test-ID 168: Mis-Fire Cylinder 7 Data
- Test-ID 169: Mis-Fire Cylinder 8 Data
- Diagnostic mode 7: Check test results of components that are continuously monitored
- Diagnostic Mode 8: Tank leak test
- Diagnostic mode 9: Vehicle information
- Readiness code
- Diagnostic Trouble Code (DTC) tables