2.0L - Turbo Fuel Injection Ignition, Engine Code(S): BPG, BWT
- 24 - Multiport Fuel Injection (MFI)
- Safety measures and cleanliness rules
- Procedure that must be performed before opening the high-pressure fuel injection system - Pay close attention!
- Technical data
- Overview of component locations
- Air filter, assembly overview
- Engine cover, removing and installing
- Air filter insert, removing and installing
- Mass Air Flow (MAF) Sensor G70 , removing and installing
- Intake Manifold, assembly overview
- Fuel rail, assembly overview
- Intake manifold with fuel rail, removing and installing
- Fuel rail, removing and installing
- Fuel injectors, removing and installing
- Combustion chamber sealing ring (Teflon sealing ring), replacing
- Fuel pressure and residual pressure before high pressure pump, checking
- High pressure pump, assembly overview
- High pressure pump, removing and installing
- Wiring and components, checking with Test box V.A.G 1598/42
- Engine Control Module (ECM) J623 , replacing
- Heated Oxygen Sensor (HO2S) G39 and Oxygen Sensor (O2S) Heater Z19 before catalytic converter, removing and installing
- Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130 and Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)) Z29 , removing and installing
- 28 - Ignition/Glow plug System