Engine Oil, RS6, Checking Level

-- Follow these steps in sequential order.

• Place the vehicle in a horizontal position.
• Let the engine warm at different RPMs less than 2, 500 RPM until the engine oil reaches a temperature of approximately 212 to 230 °F (100 to 110 °C) according to the instrument cluster.
• Let the engine run in idle for 3 minutes.
• Switch off the engine and let the oil drain down for two minutes; then check the oil level within 10 minutes.
• Add engine oil if necessary.
  Fig 1: Checking Enging Oil Level (RS6)

  Courtesy of AUDI OF AMERICA, LLC
• Oil level in the "B" range - add oil.
• Filling capacity approximately 1 liter
• The oil level can be within the "A" range.