3.2L - Fuel Injection & Ignition - Engine Code: CALA

• 24 - MULTIPORT Fuel Injection
  • General Information
    • Safety Precautions
    • Clean Working Conditions
    • Before Opening High Pressure Fuel Injection System
    • On Board Diagnostics
    • Contact Corrosion
    • Lines, Routing and Securing
  • Description And Operation
    • Component Locations Overview
    • Air Filter Overview
    • Intake Manifold, Upper Section Overview
    • Intake Manifold, Lower Section, with Fuel Rail Overview
    • High Pressure Pump Overview
  • Specifications
    • Test Data
    • Fastener Tightening Specifications
  • Diagnosis And Testing
    • Wiring and Components, Checking with Test Box -V.A.G 1598/42-
    • Vacuum System, Checking
    • Fuel System, Performing Leak Test
    • Fuel Pressure and Residual Pressure before High Pressure Pump, Checking
  • Removal And Installation
    • Air Filter
    • Intake Manifold Upper Section
      • Removing
      • Installing
    • Intake Manifold Lower Section with Fuel Rail
      • Removing
      • Installing
    • Fuel Injectors
      • Notes
      • Removing
      • Installing
    • High Pressure Pump
      • Removing
      • Installing
    • High Pressure Line
      • Notes
      • Removing
      • Installing
    • Heated Oxygen Sensor (HO2S) -G39- in Front of Bank 1 Right Catalytic Converter
      • Notes
      • Removing
      • Installing
    • Heated Oxygen Sensor 2 -G108- in Front of Bank 2 Left Catalytic Converter
      • Notes
      • Removing
      • Installing
    • Oxygen Sensor (O2S) after Three Way Catalytic Converter (TWC) -G130- Bank 1 Right
      • Notes
      • Removing
      • Installing
    • Oxygen Sensor (O2S) 2 after Three Way Catalytic Converter (TWC) -G131- Bank 2 Left
      • Notes
      • Removing
      • Installing
    • Engine Control Module
      • Notes
      • Removing
      • Installing
    • Special Tools
• 28 - Ignition/Glow Plug System
  • General Information
    • Safety Precautions
    • Ignition System
  • Description And Operation
    • Ignition Overview
  • Specifications
    • Test Data
    • Fastener Tightening Specifications
  • Removal And Installation
    • Ignition Coils with Power Output Stages
      • Notes
      • Removing
      • Installing
    • Knock Sensors -G61- / -G66-
      • Removing
      • Installing
    • Camshaft Position Sensor -G40- / - G163-, Intake Side
      • Removing
      • Installing
    • Camshaft Position Sensor -G300- / - G301-, Exhaust Side
      • Removing
      • Installing
    • Engine Speed Sensor -G28-
      • Removing
      • Installing
  • Special Tools