2.0L - Exhaust System, Emission Controls - Engine Code(S): CBEA

• 26 Exhaust System, Emission Controls
  • Description And Operation
    • PARTICULATE FILTER AND NOx ABSORPTION CATALYTIC CONVERTER ASSEMBLY OVERVIEW
    • Exhaust Door Control Unit With Reduction Catalytic Converter Assembly Overview
      • Notes
      • Seal between the Exhaust Flap Control Module -J883- and NOx Reservoir or Reduction Catalytic Converter Installed Position.
    • Center Muffler Assembly Overview
    • Exhaust Temperature Control Assembly Overview
      • Notes
      • Exhaust Gas Temperature Sensor Installed Position
    • Vacuum Connection Layout
    • EGR With EGR Cooling System Assembly Overview
    • EGR Vacuum Regulator Solenoid Valve And EGR Potentiometer Assembly Overview
  • Specifications
    • Fastener Tightening Specifications
  • Diagnosis And Testing
    • Exhaust System, Checking For Leaks
  • Removal And Installation
    • Clamps, Installed Position On Exhaust System
    • Line Routing, Exhaust System Components
      • Routing lines on the exhaust flap control module
      • Oxygen Sensor behind Three Way Catalytic Converter -G130- and Exhaust Gas Temperature Sensor 4 -G648-
    • Particulate Filter
    • NOx REDUCTION CATALYTIC CONVERTER
    • Exhaust Flap Control Module
    • Reduction Catalytic Converter
    • Center Muffler
    • Exhaust System, Installing
    • Tail Pipe, Aligning
    • Exhaust Gas Temperature Sensor 1
    • Exhaust Gas Temperature Sensor 2
    • Exhaust Gas Temperature Sensor 3
    • Exhaust Gas Temperature Sensor 4
    • Filter
    • Housing With EGR Cooler
    • EGR Motor 2
    • EGR Temperature Sensor
    • EGR Vacuum Regulator Solenoid Valve And EGR Potentiometer
  • Special Tools