ABS Control Module -J104-, REPLACING: Notes
Special tools and workshop equipment required
- Torque Screwdriver VAG 1624
- Torque Screwdriver VAG 1624
- ESD Work Surface VAS 6613
- External TORX® socket E6
NOTE:
Before removing control module, read out DTC memory and print out fault code if necessary.
The control module and the hydraulic unit can be separated.
The ESP unit must be removed in order to separate the control module and the hydraulic unit.
Only qualified personnel with the necessary training should remove the ESP unit.
Only qualified personnel wilt the necessary training should separate the control module and the hydraulic unit.