Calibration Tool VAS6350 WITH Peripheral Camera Calibration Device VAS6350/6, INSTALLING AND ALIGNING: Notes

After performing service work on the vehicle, it may be necessary to calibrate the peripheral camera system. In detail, this is the case after:

• Replacing one or more cameras
• Replace Peripheral Camera Control Module -J928- (all cameras need to be calibrated)
• Repair work on components in which a camera is installed or that influence the component location of the camera
• After suspension adjustments
• When adjusting the overlap range of the individual cameras

All cameras must be calibrated if the Peripheral Camera Control Module -J928- is replaced.