2.0L - Generic Scan Tool - Engine Code(S): CETA (Roadster)

• St Generic Scan Tool
  • General Information
    • Notes
    • Safety Precautions
    • Clean Working Conditions
    • On Board Diagnostic Systems
    • Malfunction Indicator Lamp Illumination
    • Controller Area Network Data Link
    • Electronic Power Control Warning Lamp
  • Diagnostic Modes
    • Notes
    • Fuel Supply System
    • Evaporative Emission System
    • Electronic Engine Power Control
    • Fuel Injection System
    • Engine Control Module
    • Exhaust System Components
    • Secondary Air Injection System
    • Ignition System
    • Automatic Transmission
  • Diagnosis And Testing
    • Preliminary Check
    • Readiness Code
    • Diagnostic Modes 01 - 0A
      • Notes
      • Diagnostic Mode 01 - Read Current System Data
      • Diagnostic Mode 02 - Read Operating Conditions
      • Diagnostic Mode 03 - Read DTC Memory
      • Diagnostic Mode 04 - Erase DTC Memory
      • Diagnostic Mode 05 - Read Oxygen Sensor Monitoring Test Results
      • Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions
        • Notes
        • Monitor-Id $01(01) : Oxygen Sensor Monitor Bank 1 - Sensor 1
        • Monitor-Id $02(02) : Oxygen Sensor Monitor Bank 1- Sensor 2
        • Monitor-Id $03(03): Oxygen Sensor Monitor Bank 1- Sensor 3
        • Monitor-Id $21(33): Catalytic Converter Monitoring
        • Monitor-Id $35(53) : Cam Shaft Adjustment
        • Monitor-Id $3A(58) : Fuel Tank EVAP System Integrity/Leak Test (0.90”)
        • Monitor-Id $3B(59) : Fuel Tank EVAP System Integrity/Leak Test (0.40/1.0MM)
        • Monitor-Id $3C(60) : Fuel Tank EVAP System Integrity/Leak Test (0.20/0.5MM)
        • Monitor-Id $3D(61) : Tank Vent Valve - Function Check
        • Monitor-Id $41(65) : Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
        • Monitor-Id $42(66): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
        • Monitor-Id $43(67): Oxygen Sensor Heater Monitor Bank 1 - Sensor 3
        • Monitor-Id $71(113): Secondary Air System (Only SULEV)
        • Monitor-Id $A2(162) : Mis-Fire Cylinder 1 Data
        • Monitor-Id $A3(163): Mis-Fire Cylinder 2 Data
        • Monitor-Id $A4(164): Mis-Fire Cylinder 3 Data
        • Monitor-Id $A5(165): Mis-Fire Cylinder 4 Data
      • Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle
      • Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component
        • Notes
        • Function Test
      • Diagnostic Mode 09 - Read Vehicle Information
      • Diagnostic Mode 0A - Check Permanent DTC Memory
    • DTC Tables
    • Diagnostic Procedures
      • Camshaft Adjustment Valve, Checking
      • Camshaft Position Sensor, Checking
      • Camshaft Adjustment Actuators, Checking
      • Speed Signal, Checking
      • Catalytic Converter, Checking
      • Turbocharger, G-Charger
      • Charge Air Pressure Sensor, Checking
      • Turbocharger Recirculating Valve, Checking
      • WASTEGATE Bypass Regulator Valve, Checking
      • Engine Coolant Temperature Sensor, Checking
        • Notes
        • Testing If Display Is Approx. - 40.0° C
        • Testing If Display Approx. 140.0° C
      • Engine Coolant Temperature Sensor On Radiator, Checking
      • Engine Speed Sensor, Checking
      • Evaporative Purge Regulator Valve, Checking
      • Evaporative System, Checking For Leaks
      • Evaporative Emission Canister System, Checking For Proper Seal
      • Fuel Injectors, Checking
      • Fuel Pressure Sensor, Checking
      • Fuel Pressure Regulator Valve, Checking
      • Fuel Pump Delivery Quantity, Checking
      • Fuel Pressure Test
      • Fuel Pump Electrical, Testing
      • Ignition Coil With Power Output Stage, Checking
      • Intake Air Temperature Sensor, Checking
        • Notes
        • Testing If Display Approx. -40° C Or Approx. -46° C:
        • Testing If Display Approx. 140° C:
      • Intake Manifold Runner Position Sensor, Checking
      • Intake Manifold Runner Control Valve, Checking
      • Knock Sensor 1, Checking
      • Leak Detection Pump, Checking
      • Mass Air Flow Sensor, Checking
        • Notes
        • Checking Voltage Supply
        • Checking Electrical Circuit
      • Manifold Absolute Pressure Sensor, Checking
      • Oxygen Sensor After Catalytic Converter, Checking
      • Heated Oxygen Sensor Ho2S, Checking
      • Oxygen Sensor O2S Behind Three Way Catalytic Converter, Checking
      • Oxygen Sensor 3 Behind Three Way Catalytic Converter, Checking
      • Oxygen Sensor O2S Heater, Checking
      • Oxygen Sensor O2S 1 Heater Before Catalytic Converter, Checking
      • Oxygen Sensor O2S 3 Heater Behind Catalytic Converter, Checking
      • Can Bus Terminal Resistance, Checking
      • Can Bus Instrument Cluster To Data Bus OBD Interface, Checking
      • Secondary Air Injection Valve, Checking
      • TCM To ECM Can Bus Terminal Resistance, Checking
      • Throttle Position Sensor/Accelerator Pedal Position Sensor 2, Checking
      • Throttle Valve Control Module, Checking
      • Engine Control Module Power Supply Relay, Checking
      • Engine Control Module, Replacing
      • Engine Component Power Supply Relay, Checking
      • Safety Precautions
      • Selector Lever Voltage Supply, Checking
      • Voltage Supply Of Direct Shift Gearbox MECHATRONIC, Checking