General Information: Notes
When disconnecting and connecting the battery, always perform the work procedure as described in the service information. Refer to BATTERY, DISCONNECTING AND CONNECTING . Failure to follow the sequence can trigger the battery cut-off relay and damage the electrical equipment.
Instrument cluster component functions can be checked On Board Diagnostic (OBD) program function "Output Diagnostic Test Mode (DTM)".
Additional information:
Refer to Self Study Programs
Refer to Owner's Manual.
Refer to appropriate service information.
The following components are integrated in the instrument cluster:
- Instrument Cluster Control Module -J285-
- Fuel Level Sensor -G-
- Fuel Level Sensor 2 -G169-
- Speedometer -G21-
- Tachometer -G5-
- Trip odometer reset switch
- Speaker in instrument cluster
- Indicator lamp. Refer to WARNING LAMP SYMBOLS IN INSTRUMENT CLUSTER
All warning and indicator lamps are equipped with Light-Emitting Diodes (LEDs) which cannot be serviced or replaced separately. In the event of malfunctions, the entire instrument cluster must be replaced. Refer to INSTRUMENT CLUSTER, REPLACING .