Oil Level, Checking With Oil Level Tester
Special tools and workshop equipment required
- Oil Gauge Tester T40178
Marking field on the oil level tester:
| - | - |
Perform the following procedure:
-- Adjust the oil gauge tester to the engine specific set value from the table on the above scale - arrow- by opening the opening the knurled screw and moving the adjusting ring.
NOTE:
The lower edge of the adjusting ring indicates the actual value.
-- Insert the oil gauge tester all the way (up the ring) into the oil dipstick tube. Pull it out again and check the oil level.
-- Read the value on the scale and compare it with the value from the following table.
| Engine | Adjusting value on the upper adjusting ring | Minimum oil level on the lower scale | Maximum oil level on the lower scale |
| 2.0L TFSI and 2.0L TFSI Hybrid | 39 | 0 | 24 |
| 3.0L TFSI (Not for engines CLX* and CNY*) | 132 | 0 | 13 |
| 4.0 TFSI | 185 | 0 | 21 |
| 3.0 TDI through MY 2011 | 83 | 0 | 16 |
| 3.0 TDI after MY 2012 | 87 | 0 | 12 |