LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> S7 >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Procedures >> 03 Maintenance, Diagnosis >> General Information >> Suspension Blocks, Installing >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Suspension Blocks, Installing: Notes

NOTE:

If pressure is lost in the air suspension shock absorbers, the vehicle does not have sufficient ground clearance. The vehicle must not be moved in this condition.

Use suspension blocks when, for example, the vehicle must be driven on an auto transporter or onto the hoist. This increases the ground clearance.

WARNING:
  • The vehicle must not be driven when suspensions blocks are installed.
  • The vehicle can only be moved.
  • When moving steering wheel from center position, do not turn more than a half left or right.
  • After completing suspension block installation, inspect areas around front suspension strut mounts for possible body damage and repair if necessary.
  • The upper rear control arms on the front axle must be replaced before the vehicle can be driven again.
scientia non olet · About LEMON Manuals