4.0L - MULTIPORT Fuel Injection - Engine Code(S): CEUA & CGTA

• 24 MULTIPORT Fuel Injection
  • General Information
    • Safety Precautions
      • Fuel System
      • Fuel Injection And Ignition System
      • Safety Precautions, Test And Measuring Instruments During Test Drive
      • Releasing Pressure In High Pressure Area
      • Working In Engine Compartment
    • Clean Working Conditions
    • On Board Diagnostics (OBD)
  • Description And Operation
    • Fuel Injection System Component Location Overview
      • Engine Component Location
      • Component Location, Engine From Above
      • Component Locations, Engine From Front
      • Component Locations, Engine From Right
      • Component Location, Engine From Left
    • Air Filter Overview
    • Intake Manifold Overview
    • Throttle Valve Control Module Overview
    • High Pressure Pump Overview
    • Fuel Lines Assembly Overview
      • Fuel Lines And Cylinder Bank 1 (Right)
      • Fuel Lines And Cylinder Bank 2 (Left)
    • Oxygen Sensors Overview
  • Specifications
    • Test Data
    • Fastener Tightening Specifications
  • Diagnosis And Testing
    • Fuel System, Performing Leak Test
    • Vacuum System, Checking
    • WIRE AND COMPONENT, CHECK USING THE Breakout Box w/ Detachable Terminals (196 pins) VAS 6606
  • Removal And Installation
    • Air Filter
      • Removing
      • Installing
    • Air Filter Housing
      • Removing
      • Installing
    • Intake Manifold Cylinder Bank 1 (Right) With Fuel Rail
      • Notes
      • Removing
      • Installing
    • Intake Manifold Cylinder Bank 2 (Left) With Fuel Rail
      • Notes
      • Removing
      • Installing
    • Intake Manifold Runner Position Sensor -G336-
      • Removing
      • Installing
    • Intake Manifold Runner Position Sensor 2 -G512-
      • Removing
      • Installing
    • Fuel Injectors
      • Notes
      • Removing
      • Installing
    • Intake Air Temperature Sensor -G42-
      • Removing
      • Installing
    • Fuel Pressure Sensor -G247-
      • Removing
      • Installing
    • Fuel Pressure Sensor 2 -G624-
      • Removing
      • Installing
    • Manifold Absolute Pressure Sensor -G71-
      • Removing
      • Installing
    • Throttle Valve Control Module -J338-
      • Removing
      • Installing
    • Charge Air Cooler Temperature Sensor 1 -G763- /Charge Air Cooler Temperature Sensor 2 -G764-
      • Removing
      • Installing
    • High Pressure Line
      • Cylinder Bank 1 (Right) High Pressure Line, Removal
      • Cylinder Bank 2 (Left) High Pressure Line, Removal
      • High Pressure Line, Installation
    • Low Fuel Pressure Sensor -G410-
      • Removing
      • Installing
    • High Pressure Pump
      • Notes
      • Removing
      • Installing
    • Heated Oxygen Sensors
      • Heated Oxygen Sensors -G39- /Oxygen Sensor 2 after Catalytic Converter -G131-
        • Notes
        • Removing
        • Installing
      • Heated Oxygen Sensors -G108- /Oxygen Sensor 2 after Catalytic Converter -G130-
        • Notes
        • Removing
        • Installing
    • Engine Control Module -J623-
      • Notes
      • Removing
      • Installing
  • Special Tools