Windshield Projection Head Up Display Control Module -J898-: Installing

• Tightening specification, refer to WINDSHIELD PROJECTION CONTROL MODULE OVERVIEW .

Install in reverse order of removal. Note the following:

-- Install the control module and tighten the screws.

-- Mount the windshield and secure it - do not bond it.

-- Turn on the ignition and check the control module function.

• A number must be appear on the windshield.

-- Install the windshield. Refer to WINDSHIELD .

-- Install the upper instrument panel cover. Refer to INSTRUMENT PANEL COVER, UPPER .

-- Calibrate the windshield projection control module. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .

-- Install the windshield projection control module cover. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE -J898- .