Removal & Installation

Applies To	Note	Standard Hours	Skill Level
	Includes: Additional time for use of scan tool to perform this procedure.	16.0	C
Combination Procedure: ADAPTIVE CRUISE CONTROL SYSTEM: Calibrate: DOES NOT include wheel alignment (unless noted otherwise).
	Includes: Additional time for use of scan tool to perform this procedure.	1.5	B
Combination Procedure: CLUTCH: Remove & Replace:
Dual Clutch		1.1	C
Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace:
Rear		0.7	B
Combination Procedure: FLYWHEEL: Remove & Replace:
		0.3	C
Combination Procedure: INPUT SHAFT BEARING: Remove & Replace:
		0.3	A
Combination Procedure: INPUT SHAFT SEAL: Remove & Replace:
		0.5	B
Combination Procedure: LANE DEPARTURE CAMERA: Calibrate: DOES NOT include wheel alignment (unless noted otherwise).
	Includes: Additional time for use of scan tool to perform this procedure.	1.0	B
Combination Procedure: NIGHT VISION SYSTEM: Calibrate: DOES NOT include wheel alignment (unless noted otherwise).
	Includes: Additional time for use of scan tool to perform this procedure.	1.0	B
Combination Procedure: OIL PUMP: Remove & Replace:
		3.3	B
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
		0.7	C