LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2016 >> S8 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Window Regulators >> 64 Glass, Window Regulators >> Side Windows >> Side Window, Removing And Installing >> Side Window, Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Side Window, Installing

-- The roof trim molding and side trim molding must be installed before installing the side window.

-- Installing. Refer to BONDED WINDOW GLASS INSTALLATION INSTRUCTIONS .

-- Prepare the undamaged window for installing. Refer to UNDAMAGED WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the new window for installation. Refer to NEW WINDOW GLASS, PREPARING FOR INSTALLATION .

-- Prepare the body flange for installation. Refer to BODY FLANGE, PREPARING FOR INSTALLATION .

NOTE:

1K Window Adhesive:DH 009 100 03  (small cartridge) is recommended when bonding a single window 2K Window Adhesive Kit:D 004 600 A2  is recommended when bonding more than one window.

-- If the window is new, first insert the securing pin in the C-pillar, D-pillar and then press the window into the cut-out.

If a side window is going to be re-installed, then secure it to the C-pillar and D-pillar with adhesive tape.

-- Observe minimum curing time. Refer to MINIMUM CURING TIME FOR BONDED WINDOWS .

scientia non olet · About LEMON Manuals