ATF Cooler, ATF Line

Fig 1: Identifying ATF Circuit Overview

Courtesy of AUDI OF AMERICA, LLC

1. Clip
   • Replace bent or stretched circlips.
2. ATF Cooler
   • Removing and installing. Refer to ATF COOLER, REMOVING AND INSTALLING 
3. Bolt
   • 8 Nm
4. Clip
   • Replace bent or stretched circlips.
5. O-Ring
   • Always replace
   • Coat with ATF before installing
6. ATF Pipe
   • Cleaning. Refer to Clean .
   • Install all the way by hand with a new O-ring.
   • Depending on the version made of plastic
7. Bolt
   • 20 Nm
   • First insert the ATF pipes with new O-rings by hand as far as the stop
   • The retaining tab on the lower ATF pipe must lie on the transmission threads
   • The retaining tab on the upper ATF pipe must touch the lower one.
8. Bolt
   • 8 Nm
9. O-Ring
   • Always replace
   • Coat with ATF before installing
10. ATF Pipe
    • Cleaning. Refer to Clean .
    • Install all the way by hand with a new O-ring.
    • Depending on the version made of plastic
11. Bolt
    • 8 Nm

Assembly of the oil line on the ATF cooler from approximately MY 2014

Courtesy of AUDI OF AMERICA, LLC