Engine Assembly: Remove, Install, and Overhaul

Includes: Replace Rings, Main and Rod Bearings, Camshaft(s), Crankshaft and Timing Components. Remove Cylinder ridge, burnish Cylinders, grind Valves and clean and test or replace Lifters. Includes (where applicable): Adjust Valves. DOES NOT include Pin fit or rebore and align Rods. See machine operations.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
	DOES NOT include wheel alignment. Includes: Recover, Evacuate and Recharge Air Conditioning System.	49.3		A
Combination Procedure: ADAPTIVE CRUISE CONTROL SYSTEM: Calibrate: DOES NOT include wheel alignment (unless noted otherwise).
	Includes: Additional time for use of scan tool to perform this procedure.	1.5		B
Combination Procedure: LEVEL CONTROL SYSTEM: Calibrate:
	Includes: Additional time for use of scan tool to perform this procedure. Includes: Headlight adjustment.	0.6		B
Combination Procedure: NIGHT VISION SYSTEM: Calibrate: DOES NOT include wheel alignment (unless noted otherwise).
	Includes: Additional time for use of scan tool to perform this procedure.	1.0		B
Combination Procedure: PERIPHERAL CAMERA: Calibrate:
	Includes: Additional time for use of scan tool to perform this procedure.	1.0		B