Removal & Installation
Includes: R&I only those components necessary for the removal of the complete Engine Assembly. DOES NOT include transfer components or tune Engine.
DOES NOT include alignment.
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| V6, w/R-1234yf Refrigerant | DOES NOT include wheel alignment. | 18.0 | | C |
| V6, w/R-134a Refrigerant | DOES NOT include wheel alignment. | 17.8 | | C |
| Combination Procedure: CRANKSHAFT MAIN OIL SEAL: Remove & Replace: |
| V6, Rear | | 0.7 | | B |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.5 | | C |
| Combination Procedure: LEVEL CONTROL SYSTEM: Calibrate: |
| Includes: Additional time for use of scan tool to perform this procedure.
Includes: Headlight adjustment. | 0.6 | | B |