Active Steering Control Module - J792-, Removing and Installing: Installing

Install in reverse order of removal and note the following:

• Activate the control module after installing a new Active Steering Control Module - J792-.
• Connect the Vehicle Diagnostic Tester.
• Switch the ignition on.
• Select and start the Diagnostic operating mode.
• Select the test plan tab.
• Select the select individual test button and select the following tree structure consecutively:
  • Suspension
  • Suspension control
  • 0001 - OBD-capable systems
  • 001B - Active Steering Control Module J792
  • 001B - Active Steering Control Module functions J792
  • 001B - Replace control module
• Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.
• The dynamic steering basic setting must be performed if the Active Steering Control Module - J792- was replaced. Refer to Dynamic Steering Basic Setting .