Windshield Projection Head Up Display Control Module, Removing And Installing: Installing
Install in reverse order of removal and note the following:
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- A control module that has fallen down cannot be used again.
- When inserting the control module, never apply pressure on the housing upper section.
-- Insert the control module and tighten the bolts.
-- Mount the windshield and secure it - do not bond it.
-- Turn on the ignition and check the control module function.
- A number must be visible on the windshield.
-- Calibrate the windshield projection control module. Refer to WINDSHIELD PROJECTION HEAD UP DISPLAY CONTROL MODULE, CALIBRATING .