Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Removing
-- Unclip the cover -1- with the clip release lever in direction of -arrows A, B and C- by carefully inserting the clip release lever between the windshield and the cover.
-- Repeat the procedure on the opposite side.
-- Disengage the front cover and remove toward the rear.
-- Free up and disconnect the connector -2-.
-- Release the retainers -1 and 4- and remove the lens -3- forward from the mount in direction of -arrow-.
-- Push the clip -5- toward the vehicle interior in direction of -arrow- and guide the support -6- for the Driver Assistance Systems Front Camera -R242- -1- downward and out the mount -7-.
-- Remove the Driver Assistance Systems Front Camera -R242- to the right from the retaining plate mount -2-.
-- Release the connector -3- and antenna wire -4- and disconnect.