Flight Mode: Deactivating

CAUTION:

Risk of injury due to unintended engine start on high-voltage vehicles!

Pay attention to the high-voltage system warning messages:
For procedures where the ignition must be switched off.

NOTE:

The Full pre-delivery inspection test program may also be performed as part of the pre-delivery inspection.

Procedure:

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic mode and start the diagnosis.

-- Perform the vehicle identification.

-- Deselect "Working with Guided Fault Finding" by removing v and pressing Accept .

-- Switch to the "Special Functions" tab and select the following program:

Flight mode: deactivating

-- Start the program using Perform test.. .

-- Continue the program sequence.

CAUTION:

The fight mode switches off the connection to the mobile network. A vehicle with an active flight more does not have an emergency call function and should not be given to the customer.