Night Vision System Camera -R212-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Remove the upper air guide. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .

-- Release the clamp -arrow- and remove the washer fluid hose -1-.

Fig 1: Removing Washer Fluid Hose

Courtesy of AUDI OF AMERICA, LLC

-- If necessary seal the washer fluid hose.

-- Remove the screws -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Night Vision System Camera -R212- with the retaining plate -1- from the radiator grille and guide it out upward. Pay attention that the spray nozzle is not damaged.

-- Release and disconnect the connector -2- from the Night Vision System Camera -R212-.

-- Remove the screws -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Night Vision System Camera -R212- -1- from the retaining plate -2-.