Night Vision System Control Module -J853-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Lay the carpet at the left front of the center console. Refer to CARPET, REMOVING AND INSTALLING .

-- Remove the screws in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the direction of -arrow A- and remove it.

-- Release and disconnect the connectors -3-.

-- Remove the screws -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.