Technical Data, Brakes
The brake system is divided by the axle on this vehicle.
Right and left front axle
Right and left rear axle
Brake System
| Components | Version |
|---|---|
| Brake circuit distribution | Two circuit brake system divided by the axle. |
| Left/right front axle, left/right rear axle | |
| Brake Master Cylinder | Tandem brake master cylinder |
| Brake booster | Vacuum brake booster |
| Brake pressure regulation | via ABS Control Module -J104- |
Front Brakes
| PR Number | 1LA, 1LB | 1LC, 1LD | 1LE, 1LF, 1LH | |
|---|---|---|---|---|
| 16" Brakes | 16" Brakes | 17" Brakes | ||
| Brake Rotor | Diameter in mm | 314 | 318 | 338 |
| New thickness | mm | 25 | 30 | 30 |
| Wear limit | mm | 23 | 28 | 28 |
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
| PR Number | 1LJ, 1LL | 1ZA, 1ZC | 1ZK | |
|---|---|---|---|---|
| Brake Rotor | Diameter in mm | 380 | 380 | 380 |
| New thickness | mm | 34 | 34 | 34 |
| Wear limit | mm | 32 | 32 | 32 |
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.
1) Brake pad wear limit. Refer to BRAKE PADS, CHECKING THICKNESS .
Rear Brakes
| PR Number | 1KD, 1KE | 1KF, 1KJ | 1KK, 2EJ, 1KU | |
|---|---|---|---|---|
| 16" Brakes | 17" Brakes | 17" Brakes | ||
| Brake Rotor | Diameter in mm | 300 | 330 | 330 |
| New thickness | mm | 12 | 22 | 22 |
| Wear limit | mm | 10 | 20 | 20 |
Maximum lateral run-out of steel brake rotor = 0.06 mm
Measurement in installed brake rotor
Use Dial Gauge Bracket:VAS6079/1 ; Dial Gauge - 0-10mm:VAS6079 .
Clean dirt and rust off the brake rotor.
Measure 10 mm away from the outer edge of the brake rotor.