Overview - Ignition System
WARNING: This page is about a different car, the 2022 Audi A4 Quattro and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 22 Nm
- Knock Sensor 1 -G61-
- Removing and Installing. Refer to Knock Sensor 1 -G61-, REMOVING AND INSTALLING .
- Spark Plug
- 27.5 Nm
- Spark Plug Connectors
- Ignition Coil
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and Installing. Refer to IGNITION COIL, REMOVING AND INSTALLING .
- Double Bolt
- Thread cutting
- In the existing threads: 9 Nm
- In the new tapping threads: 10 Nm
- Nut
- 9 Nm
- Bolt
- Thread cutting
- In the existing threads: 9 Nm
- In the new tapping threads: 9 Nm
- Camshaft Position Sensor 3 -G300-
- Removing and Installing. Refer to Camshaft Position Sensor 3 -G300-, REMOVING AND INSTALLING .
- O-Ring
- Replace if damaged or leaking
- O-Ring
- Replace if damaged or leaking
- Camshaft Position Sensor -G40-
- Removing and Installing. Refer to Camshaft Position Sensor -G40-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- O-Ring
- Replace if damaged or leaking
- Engine Speed Sensor -G28-
- Removing and Installing. Refer to Engine Speed Sensor -G28-, REMOVING AND INSTALLING .
- Bolt
- 4 Nm +45°
- Replace after removing