Night Vision System Control Module -J853-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the left front carpet. Refer to CARPET, REMOVING AND INSTALLING .

-- NAR version: remove the bolts -2- and nuts -1-, and remove the reinforcement plate -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- from the bracket -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connectors -3- from the Night Vision System Control Module -J853- -1-.

-- Remove the Night Vision System Control Module -J853- -1- with the bracket -2-.

-- Remove the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.