Overview - Control Module For Adaptive Cruise Control

Fig 1: Exploded View Of Control Module For Adaptive Cruise Control

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • With Heating Element for Adaptive Cruise Control Radar Sensor - Z185-
   • Removing and Installing. Refer to Heating Element for Adaptive Cruise Control Radar Sensor - Z185-, REMOVING AND INSTALLING .
2. Control Module for Adaptive Cruise Control -J428-
   • Removing and Installing. Refer to Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
   • Adjusting. Refer to RADAR SENSOR (Control Module for Adaptive Cruise Control -J428-), ADJUSTING .
3. Cover
4. Retaining Plate
   • Removing and Installing. Refer to RETAINING PLATE FOR Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
5. Bolt
   • 4 Nm
   • Quantity: 4
6. Clip
   • Must be replaced when the stud bolt is removed
   • Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
   • Quantity: 3
7. Stud Bolt
   • Quantity: 3
   • Note the adjustment dimension. Refer to Installing - Measure the dimension -a- at all stud bolts using the : VAS6335 and correct if necessary. .
8. Clip
   • Quantity: 2
   • Open version
   • Cannot be removed without being damaged
9. Clip
   • Closed version
   • Cannot be removed without being damaged
   • Note the installation position