Tools For Transmission Fluid Change
Special tools and workshop equipment required
- Oil Filler:VAS 6262A
with Oil Filler - Adapter 1:VAS 6262/1
- Used Oil Collection and Extraction Unit:SMN372500
- If necessary: Oil Filler - Adapter 6:VAS 6262/6
or Oil Filler - Adapter:VAS 6262/7
- Original 1 liter transmission fluid container and dual-clutch transmission fluid. Refer to the Parts Information for the part number.
- Vehicle Diagnostic Tester
- Protective Eyewear
- Acid-Resistant Safety Gloves
The pipe must be shorted to dimension -a- so that the bleed pipe on the adapter for the Oil Filler :VAS 6262 A does not touch the bottom on some containers.
- Dimension -a- = 210 mm.
- Dimension -a- is measured starting from the shaft (the green surface in the magnified area) on the adapter for the Oil Filler :VAS 6262 A .
-- Mark the dimension on the bleed pipe and shorten it using the Brake Line Tool Kit - Pipe Cutter:VAS 6056/2 .
-- Clean the Oil Filler:VAS 6262A .