LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1971 >> 3.0CSL Automatic Trans >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternators - BOSCH >> Overhaul >> Testing & Repairing >> Rotor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing & Repairing: Rotor

  1. Test claw pole rotor for short circuits to ground. Test voltage should be 40V AC. Measure resistance of exciter (field coil) in rotor with ohmmeter. See SPECIFICATIONS for proper value.  Turn down slip rings on a lathe, using suitable tailstock chuck (EFAW 75 or GDF 85 R 3).
  2. After turning, check concentricity of slip rings with dial gauge. Runout should not exceed 0.001" (0.03 mm). Minimum diameter of slip rings may be 1.25" (31.5 mm). Maximum runout of pole wheel must not exceed 0.002" (0.05 mm).
scientia non olet · About LEMON Manuals