Control Arm: Remove & Replace
WARNING: This page is about the 3.0CS Automatic Trans, which is a different variant/trim than selected.
DOES NOT include alignment.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Both | 7.2 | B | ||
| One Side | 4.7 | B | ||
| Combination Procedure: CONTROL ARM BUSHING: Replace: | ||||
| Each | 0.4 | B | ||
| Combination Procedure: ECCENTRIC ADJUSTER: Install: | ||||
| Each | 0.4 | B | ||