Piston Ring Set: Remove & Replace
WARNING: This page is about the 633CSi Automatic Trans, which is a different variant/trim than selected.
Includes: Remove carbon and Cylinder ridge, burnish Cylinders and replace Rod Bearings. Adjust Valves (where applicable).
DOES NOT include Pin fit and/or align.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| Automatic Trans, All Cylinders | 19.5 | A | ||
| Combination Procedure: OIL PUMP: Replace: | ||||
| 0.3 | B | |||
| Combination Procedure: PISTON OR ROD PIN: Remove & Replace: DOES NOT include Pin fit and/or align. | ||||
| Each | 0.2 | A | ||
| Combination Procedure: ROCKER ARM ASSEMBLY: Disassemble & Assemble: | ||||
| 3.0 | B | |||
| Combination Procedure: VALVE GUIDE: Replace: | ||||
| Each Additional | 0.1 | A | ||
| One | 0.8 | A | ||