| Engine Coolant |
2.3L Eng |
|
10.00 QTS. |
9.46 L |
|
|
S |
| Engine Oil |
2.3L Eng |
w/Filter |
4.60 QTS. |
4.35 L |
SAE 5W-30 Synthetic Engine Oil may be used, but it is not required. |
Mineral based oil maybe used on pre-1999 models. For reliable engine performance, mineral based engine oil viscosity must be matched to the following temperature ranges, which the vehicle will be operated: -40Deg.F to about 15Deg.F (SAE 5W-20); -40 Deg.F to about 25Deg. F (SAE 5W-30); -30Deg. F to about 40Deg F (SAE 10W-30); -30Deg. F to about 60Deg. F (SAE 10W-40); 0Deg. to about 105Deg. F (SAE 15W-50); 15Deg. F to above 120Deg. F (SAE 20W-50). |
S |
| Engine Oil |
2.3L Eng |
w/o Filter |
4.30 QTS. |
4.06 L |
SAE 5W-30 Synthetic Engine Oil may be used, but it is not required. |
Mineral based oil maybe used on pre-1999 models. For reliable engine performance, mineral based engine oil viscosity must be matched to the following temperature ranges, which the vehicle will be operated: -40Deg.F to about 15Deg.F (SAE 5W-20); -40 Deg.F to about 25Deg. F (SAE 5W-30); -30Deg. F to about 40Deg F (SAE 10W-30); -30Deg. F to about 60Deg. F (SAE 10W-40); 0Deg. to about 105Deg. F (SAE 15W-50); 15Deg. F to above 120Deg. F (SAE 20W-50). |
S |
| Engine Oil |
2.3L Eng |
w/Oil Cooler |
5.20 QTS. |
4.92 L |
SAE 5W-30 Synthetic Engine Oil may be used, but it is not required. |
Mineral based oil maybe used on pre-1999 models. For reliable engine performance, mineral based engine oil viscosity must be matched to the following temperature ranges, which the vehicle will be operated: -40Deg.F to about 15Deg.F (SAE 5W-20); -40 Deg.F to about 25Deg. F (SAE 5W-30); -30Deg. F to about 40Deg F (SAE 10W-30); -30Deg. F to about 60Deg. F (SAE 10W-40); 0Deg. to about 105Deg. F (SAE 15W-50); 15Deg. F to above 120Deg. F (SAE 20W-50). |
S |
| Fuel Tank |
2.3L Eng |
|
14.50 GALS. |
54.88 L |
|
|
S |
| Windshield Washer Fluid |
2.3L Eng |
|
3.20 QTS. |
3.02 L |
|
Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations).
Mix the washer fluid before adding it to the reservoir. |
S |