Engine Controls - System/Component Tests: Specifications
RESISTANCE SPECIFICATIONS 535i (3.5L M30 ENGINE DME 1.3)
| Component | (1) Ohms | ||
|---|---|---|---|
| Crankshaft (Speed/Position Pulse) Sensor | 490-590 | ||
| Cylinder Identification Sensor | 0.2-1.0 | ||
| Engine (Coolant) Temperature Sensor | |||
| 63-73°F (17-23°C) | 2300-2700 | ||
| 171-181°F (77-83°C) | 300-360 | ||
| Fuel Evaporation Control Solenoid | 25-65 | ||
| Fuel Injector | 15-17 | ||
| Fuel Injectors (Group Of 3) | 5-6 | ||
| Idle Speed Control Valve (Per Winding) | 18-22 | ||
| Ignition Coil | |||
| Primary Winding | 300-500 | ||
| Secondary Winding | 8000-10,000 | ||
| Intake Air Temperature Sensor | |||
| 63-73°F (17-23°C) | 2200-2700 | ||
| 117-127°F (47-53°C) | 760-910 | ||
| Kickdown Prevent Solenoid | 22-60 | ||
| - Measured at an ambient air temperature of 64-82°F (18-28°C). | |||