LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1994 >> 325is Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Electronic Transmission Control >> Self-Diagnostic System >> Diagnostic Trouble Code Definitions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Trouble Code Definitions

See DIAGNOSTIC TROUBLE CODE TYPE OF DEFECT  and DIAGNOSTIC TROUBLE CODE DEFINITIONS  tables.

DIAGNOSTIC TROUBLE CODE TYPE OF DEFECT

Defect Code Type Of Defect Stored By Control Unit
000-099 Defect Can Be Assigned To One Or Several Pins At The Control Unit Yes
100-199 Defect Cannot Be Assigned To A Pin At Control Unit. Yes
200-299 Defect Can Be Localized By Way Of Status Lists & Component Activation No
300-399 Diagnostic Procedure Cannot Be Used No
DIAGNOSTIC TROUBLE CODE DEFINITIONS (1)

DTC Description
1  Lifting Solenoid P/N Shift-Lock
2  Program Button
4  Engine Intervention
9  KVA Signal
11  Speed Signal N-MOT (TR)
20  Speed Signal N-AB
22  Oil Sump Temperature Sensor
23  Selector Lever Position
28  Battery Voltage Supply
30  Kick-Down Switch
37  Battery Voltage Supply
38  Solenoid Valve Converter
40  Pressure Regulator
43  Solenoid Valve 2
45  Solenoid Valve Band
48  Solenoid Valve 1
54  Ground Solenoid Valves
55  Throttle Sensor
100  Gear Monitoring
101  Downshift Protection
102  Overrev Protection
103  Checksum EPROM
104  Temperature Information (DKT Signal)
105  Load Information (DKT Signal)
200  No Kick-Down Shifts
201  No S-Program
202  No M-Program
203  No Program Switchover/No Display E-Program
204  No Engine Intervention (E36)
204  No Display M-Program (E34)
205  Adaptation Air Conditioning Defective (E36)
205  No Program Switchover (E34)
206  Detection Brake Light Switch & Brake Light Test Switch Defective (E36)
206  No Engine Intervention (E34)
207  Incorrect Fault Display (E36)
207  A/C System Adaptation Defective (E34)
208  Brake Light Switch Detection Defective
209  Incorrect Fault Display
300  Diagnostic Link Defective
301  Control Unit Supply Defective
(1) For diagnostic procedures, see DIAGNOSTIC TESTS  . Codes listed do not necessarily apply to all systems.