Vehicle - Vehicle Order

By selecting "Vehicle order" the ability to adapt/modify the vehicle order can be accessed.

NOTE: Changing the vehicle order may affect vehicle operation. Modifying the vehicle order should only be performed when directed to do so by the Technical Hotline, Service Information Bulletin or Aftersales Installation Instructions.

Fig 1: Selecting Vehicle Order Button

Courtesy of BMW OF NORTH AMERICA, INC.

Selection of "Adapt VO" provides the ability to install a modified Vehicle Order file.

Fig 2: Selecting Adapt VO Button

Courtesy of BMW OF NORTH AMERICA, INC.

Before selecting "Continue" a floppy disk (1.44) containing the modified/new vehicle order must be inserted into the disk drive of the SSS.

NOTE: The modified VO file is obtained from the Technical Hotline by submitting a PUMA case requesting a modified VO, the PUMA case should indicate what accessory/feature needs to be added or removed. The modified file will be sent via E-mail and must be copied on to a 1.44" floppy disk. Do not attempt to open the received file on a PC, as this may corrupt the data contained in the file.

Fig 3: Selecting Continue Button

Courtesy of BMW OF NORTH AMERICA, INC.