CIP Functions - If No (MOST-Bus Vehicles)

After selecting "No" CIP evaluates the installed control modules to determine if any updates are required.

Fig 1: Display Fitted Control Module Determined

Courtesy of BMW OF NORTH AMERICA, INC.

Once the evaluation is completed and CIP determines that there are updates available a "Status report" is generated.

NOTE: Status report is similar to a measures plan.

The status report identifies the control modules for which an update is available and also indicates if the module will need to be reprogrammed or replaced.

Information is also provided indicating the current programmed part number and also what the number should be after an update is performed.

Fig 2: Display Status Report

Courtesy of BMW OF NORTH AMERICA, INC.

If "Cancel update" is selected or if CIP determines that there are no updates needed or available for the vehicle then the "Control module selection" screen is displayed.

Fig 3: Display Control Module Selection Screen (1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.