Diagnosis & Testing
CAUTION:
You should only use brake dynamometers whose test speed is no more than 3 mph (5 km/h). You must follow without fail the guidelines contained in the operating instructions of the relevant test stand manufacturer. Failure to do so may result in damage to the vehicle and the system and also personal injury.
NOTE:
Testing procedures are not available from manufacturer.
On cars equipped with ASC+T or DSC, the system must be deactivated with the switch if testing on a brake dynamometer. ASC+T/DSC indicator lamp in instrument cluster light up.
The brakes must be at normal operating temperature. To achieve this, brake the car several times to slightly warm and dry brake disks.